Laser-cut plate
up to 3.5 inches
thick.
Our 30 kW fiber laser cuts heavy industrial plate most shops can only waterjet or flame cut. Every surface deslagged and every hole deburred — and turned around fast.
We do the finishing.
Your shop doesn't.
Every surface deslagged and every hole deburred before it ships — so parts go straight into your process instead of onto a grinding bench.
Deburred, not just cut
Every surface deslagged and every hole deburred — no rough edges or leftover slag for your team to clean up.
Fast when it counts
Built for turnaround season and the deadlines no one else will hit. Critical parts delivered when others are behind schedule.
Traceable material
Mill Test Reports available on request for everything we purchase. Full material traceability for engineering-driven, spec-critical work.
Plate that used to mean waterjet or flame — now laser-cut.
Our 30 kW fiber laser cuts heavy industrial plate most shops can only waterjet or flame cut — and it cuts it far faster than a waterjet, holding tight, repeatable tolerances. Every surface is deburred after cutting, so parts arrive with no rough edges.
- Orders of magnitude faster — cut in minutes, not the hours a waterjet needs
- Tighter, repeatable tolerances — CNC-precise part after part, to reduce or eliminate machining/finishing work
Materials we cut
Thin-gauge sheet to heavy industrial plate, across four alloy families. If you don't see your grade, ask — the list below represents most commonly requested.
Stainless Steel
- 301
- 304 / 304L
- 304H
- 316 / 316L (Marine-grade)
- 316H
- 317L
- 321 (Heat-resistant)
- 347
- 410
- 420 (Cutlery grade)
- 440C (High hardness)
- 2205
- 2507 (Super duplex)
Carbon Steel
- A36
- A1011
- 1018
- A516-70 (as rolled & normalized)
- A514 (Quenched & tempered)
- A572 Grade 50
- A588 (Weathering)
- 4130
- 4140
- A387 Chrome Moly
- Galvanized sheet & plate
Aluminum
- 5052
- 6061
- 2024
- 7075
Exotic
- Alloy 20
- Alloy 200
- Alloy 400
- Alloy 600
- Alloy 625
- Alloy 800
- Alloy 825
- Alloy C276
- Alloy X
- Grade 2
- Grade 5
- Grade 7
- Grade 12
- 70/30 Copper Nickel (Grade C751)
- 90/10 Copper Nickel (Grade C706)
- C260
- C464 Naval Brass
- 660 Bearing Bronze
Plant down? We take break-in jobs.
When a part fails or a schedule slips, you can't sit in a queue. We take break-in and rush work with fast response time — call and we'll tell you promptly whether we can hit your date, then cut, deburr, and turn it around quick.
Laser cutting solutions for heat exchanger manufacturers
Baffles, support plates, and custom internals — cut to print, deslagged, and deburred on all surfaces.
- Segmental & doughnut baffles and support plates
- All surfaces deburred — no rough edges entering your assembly
- Stainless, carbon, duplex & nickel alloys; MTRs available on request
- Short lead times through plant turnaround season
Featured products
Commonly cut components. Every part deburred on all surfaces.
Segmental Baffles
Single & double segmental, deslagged hole-by-hole and deburred on all surfaces.
Support Plates
Tube support and intermediate plates cut to spec, deburred flat and clean so they slide into the bundle without rework.
Flanges & Rings
Slip-on, blind, and custom ring flanges with accurate bolt circles and bores — cut from plate in carbon, stainless, and alloys.
Mounting & Structural Plates
Brackets, base plates, gussets, and structural components with holes, slots, and profiles cut to print and deburred clean.
Prototype Parts
First articles and one-off parts cut straight from your file — no tooling, no minimums, in your production material from the start.
Custom Parts
Production runs of non-catalog parts — gaskets, wear plates, gear blanks, and complex profiles in any alloy we cut.
Arc Segments
Curved segments cut straight from flat plate — ring and stiffener segments with the bolt holes already in. No rolling operation, no second vendor.
From print to ready to ship
Send the print
Send us your drawing in DXF, DWG, or PDF form — or a scan of a hand-drawn print. We'll talk through material, tolerance, and timeline to get your product cut and shipped fast.
Cut on the 30 kW
High-power fiber cutting for clean edges and speed — thin gauge through heavy plate.
Deburr & deslag
Every surface deslagged, every hole deburred. The step most shops skip.
Delivered quickly
Fast turnaround and shipped out. MTRs available on request.
The 30 kW, running
Fig. 19 — 30 kW fiber laser cutting a heat exchanger baffle. Every surface deslagged and every hole deburred before it ships.
Built for industrial work
Refining & Petrochem
Heat Exchanger & Pressure Vessel
OEM & Equipment Builders
Fabrication Shops
Oil & Gas / Midstream
Large Scale Manufacturing
Contact us. Hear back promptly.
Tell us what you're making and we'll talk it through — material, thickness, lead time, deburring. We cut to your prints, so send your drawings (DXF, DWG, or PDF) and we'll send you a quote fast. Still working from hand-drawn prints or old photocopies? Send those too — we convert them to CAD in house. No portal, no runaround.
sales@rsc-industrial.com